CASAPPA Replacements
CASAPPA Hydraulic Gear Pump 799137GY KP30 Series
CASAPPA 799137GY, 799137GX, 7993004W, 799137H0, and 85824395 are high-pressure cast-iron multi-section hydraulic external gear pumps engineered for heavy-duty earthmoving and mobile construction machinery. Built on the modular CASAPPA KAPPA and POLARIS architectures (combining KP35, KP30, and KP20 frame platforms), this multi-stage assembly combines high-strength spheroidal ductile cast-iron front, intermediate, and rear housing bodies with precision-hobbed alloy steel gear pairs and pressure-balanced hydrostatic thrust plates that continuously compensate for internal clearances to sustain volumetric efficiencies above 95%. Engineered as a direct OEM-specification drop-in replacement for New Holland and Case backhoe loaders—including LB115, LB115.B, LB115CP, and Case 695SM machines—the pump integrates primary implement actuation (KP35/KP30) and auxiliary steering/pilot control flow (KP30/KP20) into a single compact driveline envelope. Configured with a heavy-duty SAE standard involute spline drive shaft, SAE 2-bolt heavy-duty mounting flange, and side-positioned SAE J518 Code 61 4-bolt split-flange ports, it operates across a speed range from 350 to 3,000 r/min, delivers continuous working pressures up to 250–280 bar (3,625–4,060 psi) with peak pressure capability reaching 300 bar (4,350 psi), delivering high flow and pressure stability with low noise and maximum service durability.
| CASAPPA 799137GY / 799137GX / 85824395 Applications
The pump is engineered to feed continuous-duty hydraulic circuits on mobile earthmoving equipment and heavy industrial machinery. It serves as the primary hydraulic power source for Case and New Holland backhoe loaders (LB115, LB115.B, LB115CP, B100, B110, B115, Case 695SM, 580, and 590 Super M), supplying high-pressure oil to loader arms, backhoe boom, stick, bucket cylinders, and priority hydrostatic steering circuits. Across the wider KP35, KP30, and KP20 application spectrum, it powers wheel loaders, telehandlers, rough-terrain forklifts, mobile cranes, refuse collection compactors, forestry harvesters, and stationary industrial hydraulic power units (HPUs) — converting drive-shaft rotation into reliable pressurized flow under demanding duty cycles, high shock loads, and extreme ambient conditions. Standardized mounting flanges, spline shafts, and flanged port configurations allow direct machine retrofit without alterations to mounting bell housings or hydraulic piping.
Key parameters
Product Models: 799137GY / 799137GX / 7993004W / 799137H0 / 85824395
Brand Replacement: CASAPPA OEM / CNH OEM or as requested.
Pump Architecture: Heavy-duty multi-section external gear pump (modular KP35 / KP30 / KP20 frame platforms)
Rotation Direction: Clockwise (D), looking at the drive shaft (anti-clockwise version available as code S)
Continuous Operating Pressure (p1): 230 to 280 bar (3,335 to 4,060 psi) depending on section displacement
Peak Pressure (p3): Up to 300 bar (4,350 psi)
Mounting & Drive Shaft: Heavy-duty SAE 2-bolt spigot flange with SAE standard involute splined drive shaft
Min./max. speed (350 / 3,000 r/min), the relief-valve and peak pressure ratings, the interface data and the flange and clamp-bolt torques are listed in full in Techspecs below.
| Overview of CASAPPA 799137GY / 799137GX / 85824395 High-Pressure Gear Pumps
CASAPPA 799137GY, 799137GX, 7993004W, 799137H0, and 85824395 are high-pressure cast-iron multi-section external gear pumps. Casappa builds this range around heavy-duty bodies, intermediate flanges, and mounting plates in high-strength spheroidal ductile cast iron, delivering maximum mechanical stiffness, vibration dampening, and resistance to housing deformation under high cyclical pressure spikes. Inside the pump, dual external gear sets run on low-friction, high-load hydrodynamic PTFE DU sleeve bearings lubricated by fluid slip channels between floating bronze-faced thrust balance plates that compensate for axial wear and maintain volumetric efficiencies exceeding 95% across continuous operation.
In heavy earthmoving applications, this unit draws oil from the reservoir and supplies multiple dedicated circuits: a high-flow primary stage (KP35/KP30) dedicated to loader bucket and backhoe boom functions, and a synchronized secondary stage (KP30/KP20) powering hydrostatic steering, braking, or pilot controls. Configured with a heavy-duty SAE 2-bolt mounting flange and SAE involute spline shaft, the pump features side-mounted SAE J518 4-bolt split-flange ports for leak-free, shock-resistant fluid connections. Operating in clockwise rotation (D) without an external outboard bearing (0), this multi-section unit delivers direct dimensional and functional interchangeability for factory-installed CNH assemblies.
| Dimension of CASAPPA 799137GY / 799137GX / 85824395 High-Pressure Gear Pumps
Reference dimensions for the multi-section gear pump assembly with heavy-duty SAE 2-bolt mounting flange and side SAE J518 flanged ports. The letters correspond to the dimensional drawing.
| Ref. | mm | in | Description |
|---|---|---|---|
| L1 | 278.0 | 10.94 | Total assembly length from mounting face to rear cover |
| L2 | 142.5 | 5.61 | Front pump section length to intermediate coupling flange |
| L3 | 135.5 | 5.33 | Rear pump section length from intermediate flange to rear cover |
| A1 | 96.0 | 3.78 | Front section port centerline from mounting face |
| A2 | 218.0 | 8.58 | Rear section port centerline from mounting face |
| D1 | 101.6 | 4.00 | SAE 2-bolt pilot spigot diameter (+0 / -0.05 mm) |
| S1 | 146.0 | 5.75 | Center-to-center distance between mounting bolt holes |
Interface data needed with the drawing:
| Item | Value |
|---|---|
| Mounting flange | SAE standard 2-bolt heavy-duty pilot flange (Ø 101.6 mm / 4.0 in spigot pilot) |
| Drive shaft | SAE standard involute spline shaft (high-torque 16/32 DP flat root side fit) |
| Outboard bearing | 0 — without outboard bearing (standard heavy-duty drive configuration) |
| Rotation | D — clockwise, looking at the drive shaft end |
| Ports position | Side-positioned flanged ports on both front and rear stages |
| Primary Stage Ports (Inlet / Outlet) | SAE J518 Code 61 split-flange — Inlet 1-1/4" / 1-1/2" (M10/M12), Outlet 3/4" / 1" (M10) |
| Secondary Stage Ports (Inlet / Outlet) | SAE J518 Code 61 split-flange — Inlet 1-1/4" (M10), Outlet 1/2" / 3/4" (M8/M10) |
| Seals | N — Buna NBR standard (Viton-FKM available for high temperature) |
| Body construction | High-tensile spheroidal graphite ductile cast iron (all stages) |
| Mounting flange bolt tightening torque | 85 ±5 Nm (750 ÷ 800 lbf in) |
| Intermediate tie-rod clamp bolt torque | 140 ±14 Nm (1,115 ÷ 1,363 lbf in) |
| Pump Installation Specifications CASAPPA 799137GY / 799137GX / 85824395
The CASAPPA multi-section pump architecture uses a standardized modular coding matrix where each position defines a mechanical parameter of the primary, intermediate, and secondary stages:
Code structure — reference: KP 35/30/20 Series Multi-Section Cast-Iron Assembly
| Pos. | Meaning | Standard Configuration & Options |
|---|---|---|
| 1 | Pump Series | KP35 / KP30 / KP20 multi-section cast iron gear pump architecture |
| 2 | Rotation | D clockwise (looking at shaft) / S anti-clockwise |
| 3 | Outboard bearing | 0 without outboard bearing (direct bell-housing spline engagement) |
| 4 | Drive shaft | SAE heavy-duty involute spline shaft (high-torque multi-stage rating) |
| 5 | Mounting flange | SAE 2-bolt heavy-duty spigot flange (101.6 mm pilot diameter) |
| 6 | Ports position | Side-positioned ports on front and rear pump casings |
| 7 | Ports IN/OUT | SAE J518 Code 61 4-bolt split-flange standard connections (metric fastening threads) |
| 8 | Seals | N Buna NBR (standard) / V Viton-FKM (high-temperature specification) |
| 9 | Body design | Ductile cast iron high-pressure heavy-duty construction |
| 10 | Section coupling | Internal synchronized heavy-duty splined intermediate coupling |
| Reading your codes & OEM cross-references
| Part Number | Source / Manufacturer | Primary Machine Fitment | Configuration Notes |
|---|---|---|---|
| 799137GY | CASAPPA | New Holland LB115 / Case 695SM | Multi-section cast iron gear pump with integrated flow controls |
| 799137GX | CASAPPA | New Holland LB115, LB115.B, B110, B115 / Case 695SM | Tandem cast iron gear pump with integrated control valve configuration |
| 799137H | CASAPPA | Case 580 / 590 Super M, New Holland LB Series | Heavy-duty dual gear pump assembly for main hydraulic loop |
| 799137H0 | CASAPPA | New Holland LB115 / LB115CP Backhoe Loaders | Tandem cast iron external gear pump, standard rotation |
| 7993004W | CASAPPA | Industrial HPUs & CNH Construction Equipment | Multi-circuit high-pressure gear pump |
| 85824395 / 85824395R | CNH / New Holland | New Holland LB115, LB115.B, LB115CP / Case 695SM | OEM primary hydraulic pump assembly (New & Remanufactured) |
| 85826148 | Case / New Holland | Case 695SM, New Holland LB115 4WS Backhoe | OEM direct replacement pump assembly |
| 85826149 | Case / New Holland | Case 580 / 695 Series Equipment | Companion OEM pump / valve variant |
| 85817699 / 79933052 | Case / New Holland | CNH Loader Backhoes (Intermediate revision) | Direct interchangeable multi-stage pump unit |
Techspecs — CASAPPA 799137GY / 799137GX / 85824395 High-Pressure Gear Pumps
Performance
| Parameter | Primary Work Section (KP35 / KP30) | Secondary Steering / Auxiliary Section (KP30 / KP20) |
|---|---|---|
| Applicable Architecture | KAPPA KP35 / KP30 | KAPPA KP30 / POLARIS KP20 |
| Nominal Displacement | 34.0 to 51.0 cm³/rev (2.07 to 3.11 in³/rev) | 14.0 to 29.0 cm³/rev (0.85 to 1.77 in³/rev) |
| Continuous Operating Pressure p1 | 250 bar (3,625 psi) | 260 bar (3,770 psi) |
| Intermittent Relief Setting p2 | 270 bar (3,915 psi) | 280 bar (4,060 psi) |
| Peak Pressure p3 | 290 bar (4,205 psi) | 300 bar (4,350 psi) |
| Maximum Continuous Speed | 3,000 r/min | 3,000 r/min |
| Minimum Operating Speed | 350 r/min | 350 r/min |
| Theoretical Flow @ 1,500 r/min | ~51.0 to 76.5 l/min (13.5 to 20.2 US gpm) | ~21.0 to 43.5 l/min (5.5 to 11.5 US gpm) |
| Theoretical Flow @ 2,200 r/min (Rated) | ~74.8 to 112.2 l/min (19.8 to 29.6 US gpm) | ~30.8 to 63.8 l/min (8.1 to 16.8 US gpm) |
| Max. Allowable Drive Shaft Input Torque | 450 Nm (3,980 lbf in) combined input capacity | — |
| Intermediate Coupling Torque Capacity | 220 Nm (1,947 lbf in) | — |
| Volumetric Efficiency | ≥ 95% at rated operating pressure | ≥ 95% at rated operating pressure |
| Hydro-mechanical Efficiency | ≥ 90% | ≥ 90% |
Interfaces and configuration
| Parameter | Value |
|---|---|
| Rotation | D — clockwise, looking at the drive shaft end |
| Mounting flange | SAE standard 2-bolt heavy-duty spigot flange (pilot Ø 101.6 mm / 4.0 in) |
| Drive shaft | SAE standard heavy-duty involute spline shaft |
| Ports position | Side-positioned flanged ports on both stages |
| Primary Stage Ports | SAE J518 Code 61 4-bolt split flange — Inlet 1-1/4" / 1-1/2", Outlet 3/4" / 1" |
| Secondary Stage Ports | SAE J518 Code 61 4-bolt split flange — Inlet 1-1/4", Outlet 1/2" / 3/4" |
| Outboard bearing | 0 — without outboard bearing |
| Seals | N — Buna NBR standard (Viton-FKM high-temperature optional) |
| Construction | High-strength spheroidal ductile cast iron across all sections |
| Mounting flange bolt tightening torque | 85 ±5 Nm (750 ÷ 800 lbf in) |
| Intermediate tie-rod clamp bolt torque | 140 ±14 Nm (1,115 ÷ 1,363 lbf in) |
| Port bolt tightening torque | M8: 20 +1 Nm (177 ÷ 186 lbf in) · M10: 35 +2.5 Nm (310 ÷ 332 lbf in) · M12: 60 +5 Nm (531 ÷ 575 lbf in) |
Operating conditions
| Parameter | Value |
|---|---|
| Fluid | Mineral-oil-based hydraulic fluid to ISO 6743/4 (HL, HLP) and DIN 51524 |
| Inlet pressure range (absolute) | 0.7 ÷ 3.0 bar abs. (10 ÷ 44 psi abs.) |
| Viscosity — recommended | 17 to 60 mm²/s (cSt) [85 to 280 SSU] |
| Viscosity — permissible range | 12 to 1,000 mm²/s (cSt) [65 to 4,600 SSU] |
| Cold start maximum viscosity | 2,000 mm²/s (cSt) [9,270 SSU] |
| Fluid temperature, N seals | −25 °C to +80 °C continuous (−13 °F to +176 °F); 100 °C (212 °F) peak |
| Fluid temperature, V seals | −20 °C to +110 °C continuous (−4 °F to +230 °F); 125 °C (257 °F) peak |
| Recommended contamination level | Δp > 210 bar: NAS 1638 class 8 / ISO 4406 19/17/14 (10 μm filter element β10(c) ≥ 200) |
| Permissible contamination level | Δp < 140 bar: NAS 1638 class 10 / ISO 4406 21/19/16 (25 μm filter element) |
| Storage conditions | Dry environment, 5 °C to 20 °C (41 °F to 68 °F), maximum 24 months |
| Dimensions | see section 2. |
Advantages
100% Cast-Iron Construction Across All Sections
Spheroidal graphite cast iron eliminates housing deflection and barrel expansion under continuous digging pressures above 250 bar, preventing internal fluid slip and maintaining cycle speeds.
Direct OEM Interchangeability
Engineered with exact mounting pilot diameters, spline tooth dimensions, and port centerline spacings for Case and New Holland 85824395, 85826148, and 799137GY / 799137GX assemblies for simple drop-in replacement.
Multi-Circuit Synchronized Flow
Combines primary implement supply (KP35/KP30) and auxiliary steering/pilot flow (KP30/KP20) into a single compact housing footprint, eliminating the complexity, cost, and driveline space of separate pumps.
Extended Bearing Longevity under Contamination
High-load hydrodynamic PTFE DU sleeve bearings spread shaft loads over broad hydrodynamic oil films, offering superior contamination and fatigue tolerance compared to needle roller bearings.
Superior Volumetric Efficiency
Floating hydrostatic thrust plates automatically compensate for face wear and thermal variations, holding volumetric efficiency above 95% over thousands of service hours.
Low Noise & Reduced Pressure Pulsation
Precision-ground gear teeth with anti-trapping decompression grooves minimize hydraulic ripple, lowering acoustic emissions inside machine operator cabs.
Standard SAE Split-Flange Sealing
SAE J518 Code 61 4-bolt split-flange ports eliminate port thread stress and body cracking risks caused by tapered pipe threads under high hydraulic impulse shock.
6. Reference of CASAPPA 799137GY / 799137GX / 85824395 High-Pressure Gear Pumps
6.1 Series architecture across KP35, KP30, and KP20
The multi-section assemblies in this series draw upon the standardized modular KAPPA and POLARIS frame sizes:
| Frame Size | Displacement Range | Continuous Pressure (p1) | Peak Pressure (p3) | Speed Range | Application Focus |
|---|---|---|---|---|---|
| KP35 | 40.00 to 65.00 cm³/rev | 250 to 280 bar | 280 to 300 bar | 350 to 2,800 r/min | Heavy backhoe main implement stages (LB115) |
| KP30 | 19.63 to 43.98 cm³/rev | 230 to 280 bar | 270 to 300 bar | 350 to 3,000 r/min | Mid-size backhoes, secondary implement stages |
| KP20 | 4.95 to 33.03 cm³/rev | 210 to 280 bar | 250 to 300 bar | 350 to 3,500 r/min | Steering, braking, and pilot control circuits |
6.2 Complete order and OEM cross-reference numbers identified on the market
Complete pump order and cross-reference numbers identified for this equipment group:
| Part number |
| 799137GY |
| 799137GX |
| 799137H |
| 799137H0 |
| 7993004W |
| 85824395 |
| 85824395R |
| 85826148 |
| 85826149 |
| 85817699 |
| 87362336 |
| 79914144 |
| 79933052 |
| KP30.34-05S6-LMF/0D-M5-KSL/30 |
| KP30.38-05S6-LMF-00-M5-KSL-30 |
| KP30.43-A8K9-LMD/MC |
7. Brand Replacement
HENGYUHANG supplies precision engineered replacements for the CASAPPA multi-section pump series, including part numbers 799137GY, 799137GX, 7993004W, 799137H0, and OEM number 85824395. The replacement is manufactured to exact OEM dimensional envelopes and standardized SAE interface specifications — matching drive splines, pilot flanges, and split-flange hydraulic ports — allowing machines originally fitted with Casappa or CNH equipment to be restored to factory hydraulic performance without modifying driveline couplings, chassis mounting brackets, or pipework.
Replacement assemblies comply with published OEM performance parameters and pressure ratings. Fitment is determined by the original equipment part number or machine model; please provide the original pump nameplate code or vehicle serial number when ordering.
8. Applications of CASAPPA 799137GY / 799137GX / 85824395 High-Pressure Gear Pumps
Typical machinery applications of this high-pressure multi-section pump series:
Backhoe Loaders: Primary hydraulic pump on Case and New Holland four-wheel steer (4WS) and two-wheel steer (2WS) machines (LB115, LB115.B, LB115CP, Case 695SM, 580/590 Super M).
Building & Construction: Wheel loaders, compact excavators, trenchers, skid-steer loaders, and compaction rollers.
Material Handling: Telescopic handlers, rough-terrain forklifts, aerial work platforms, and mobile cranes.
Forestry & Timber Machinery: Forwarders, log splitters, conveyor drives, and tree harvesting attachments.
Municipal & Utility Vehicles: Refuse compactor trucks, street sweepers, vacuum trucks, and snow removal hydraulic circuits.
Industrial Hydraulics: High-pressure hydraulic power packs, metal scrap balers, waste compactors, and stationary presses.
In these machines the pump feeds primary work circuits and priority steering loops that operate continuously under demanding pressure cycles, requiring uninterrupted volumetric efficiency and high thermal stability.
9. Package & Shipping
| Item | Specification |
|---|---|
| Packaging | Single unit secured in reinforced wooden export crate with protective port plugs |
| Selling unit | Single item — MOQ 1 unit |
| Net weight | Approximately 28.5 kg to 34.0 kg depending on multi-stage displacement configuration |
| Gross weight | Approximately 31.0 kg to 37.0 kg with export wooden crate packaging |
| Lead time | 3 to 7 working days for standard configurations; volume orders per schedule |
| Shipping | Air freight, sea freight, or international express (DHL, FedEx, UPS) to destination |
| Customization | Custom laser nameplate, custom branding, and specialized packaging for fleet distributors |
| Warranty | 1 year full warranty against manufacturing defects |
10. Why Choose Hengyuhang?
A hydraulic specialist, not a general trader. Quanzhou Hengyuhang Power Technology Co., Ltd. is located in Fujian, China, specializing in the precision manufacture of hydraulic gear pumps, motors, tandem assemblies, and custom hydraulic valve systems.
One-piece minimum order. MOQ is one unit, allowing single machines or field repairs to be completed without purchasing production batches.
OEM model-level cross-referencing. Provide your original pump code (799137GY, 799137GX, 85824395, etc.) or machine model (New Holland LB115, Case 695SM), and every dimensional interface, port pattern, and shaft spline is verified prior to dispatch.
Full multi-section architecture coverage. Comprehensive manufacturing coverage spanning KP35, KP30, and KP20 single, tandem, and multi-stage pump assemblies.
In-house CNC machining and computerized testing. High-precision CNC machining centers, automated gear grinding, single-piece assembly, and 100% computerized hydraulic bench testing verifying flow, pressure, and leakage before shipping.
Fleet replacement coverage. Complete replacement pump coverage across leading global construction equipment brands, allowing operators to streamline fleet hydraulic procurement with a single dependable supplier.
One-year warranty and global support. Full one-year warranty on all assemblies, backed by rapid technical assistance for installation and commissioning.
CASAPPA Hydraulic Pumps 799137GY 799137GX 7993004W 799137H0 85824395 High-Pressure Oil Pump KP35 KP20 KP30 Hydraulic Gear Pump is a versatile series of heavy-duty, fixed-displacement cast iron hydraulic gear pumps designed for continuous high-pressure fluid power transmission. Covering multiple frame sizes including KP20, KP30, and KP35 in single-pump and Group 3+3 tandem multi-circuit configurations with optional built-in relief valves, these pumps feature rigid cast iron bodies, precision-ground gears, and pressure-balanced wear plates. Engineered for seamless OEM compatibility with Case, New Holland, and FIAT KOBELCO backhoe loaders and tractors, they deliver steady flow, high volumetric efficiency, and long service life under severe working conditions.
| Applications
The CASAPPA KP20 / KP30 / KP35 series hydraulic gear pumps are widely used across construction machinery (wheel loaders, backhoe loaders, excavators), agricultural equipment (tractors, harvesters), industrial hydraulic systems (presses, conveyors), material handling equipment (forklifts, cranes), and municipal utility vehicles, powering main working circuits, steering systems, and auxiliary lifting mechanisms under high continuous loads.
| Technical Specifications
| Parameter | Specification |
|---|---|
| Brand | CASAPPA |
| Series | KP20 / KP30 / KP35 Series |
| OEM Cross Reference | 799137GY, 799137GX, 7993004W, 799137H0, 85824395 |
| Product Type | Cast iron external hydraulic gear pump (single pump / Group 3+3 tandem pump) |
| Housing Material | High-strength cast iron |
| Displacement Range | Frame sizes from KP20 (compact) and KP30 (medium flow) up to KP35 (high flow/torque) |
| Max. Peak Pressure | Up to ~330 bar (4785 psi) |
| Max. Continuous Pressure | 200 ~ 285 bar (configuration dependent) |
| Max. Speed | Up to 4000 min⁻¹ |
| Rotation Direction | Clockwise (D), Counter-clockwise (S), Reversible (R) |
| Volumetric Efficiency | 92 ~ 96% (typical industry specs) |
| Mounting Flange | SAE / European standard 4-bolt or 2-bolt flange |
| Drive Shaft | Keyed, splined, or tapered shaft (per OEM configuration) |
| Port Connections | Threaded (BSPP / SAE) or SAE split flange |
| Working Fluid | Mineral hydraulic oil (HLP / HM, ISO VG 32 ~ 68) |
| Operating Temperature | -20°C ~ +80°C (approximate reference values) |
| Compatible Equipment | Case 580 / 590 / 695 backhoe loaders, New Holland LB115 / LB115.B / LB115CP loaders, JCB loaders |
| Model Cross Reference & Configurations
| Part Number | Model / Type | Built-in Valve | Remarks |
|---|---|---|---|
| 799137GY | KP30.38-05S6-LMF/OD-M5-KSL/30 tandem pump | Yes (built-in KSL valve) | Case / JCB loader replacement |
| 799137GX | Tandem double pump (Group 3+3) | Yes (with valve) | approx. 33.0 kg |
| 7993004W | Tandem double pump (Group 3+3) | Yes (with valve) | approx. 33.0 kg |
| 799137H0 | Tandem double pump (Group 3+3) | Standard | approx. 33.5 kg |
| 85824395 | Cast iron external gear pump | Standard | New Holland LB115 / Case 695 |
| Part number |
| 799137GY |
| 799137GX |
| 799137H |
| 799137H0 |
| 7993004W |
| 85824395 |
| 85824395R |
| 85826148 |
| 85826149 |
| 85817699 |
| 87362336 |
| 79914144 |
| 79933052 |
| KP30.34-05S6-LMF/0D-M5-KSL/30 |
| KP30.38-05S6-LMF-00-M5-KSL-30 |
| KP30.43-A8K9-LMD/MC |
WhatsApp
Email
+86 19918575358
