CASAPPA Replacements
CASAPPA Cast iron External Gear Pump KP30.34D
CASAPPA KP30.34D-83E3-LED/EB-N is a KAPPA 30 cast-iron external gear pump — the group 3 size of Casappa's two-piece cast-iron range, with a geometric displacement of 34.56 cm³/rev (2.11 in³/rev). Body and mounting flange are cast iron of superior mechanical specification, and the solid, compact two-piece assembly carries a precision external gear pair on sleeve bearings between pressure-balanced thrust plates that compensate for wear and hold volumetric efficiency as pressure rises. Configured here with the European 1:8 tapered drive shaft (code 83), the European E3 mounting flange and side-positioned European flanged ports (ED/EB), it runs from 350 to 3,000 r/min, is rated 250 bar (3,625 psi) continuous pressure, 270 bar (3,915 psi) system pressure and 290 bar (4,205 psi) peak in the standard CSC body design, and moves up to 103.7 l/min of oil at maximum speed — high pressure and high flow in a reduced envelope, with low noise emission and the long working life the cast-iron KAPPA construction is specified for.
| CASAPPA KP30.34D-83E3-LED/EB-N Applications
The pump is engineered to feed continuous-duty hydraulic circuits on mobile and industrial machinery. It is used on building and construction equipment, material handling machinery, forestry machines and fan drives, and across the wider KAPPA application range on agricultural implements, cranes, winches, mixers, presses and machine tools — converting drive-shaft rotation into pressurised flow for cylinders, motors and valve blocks, and holding that flow under sustained load, high duty cycles and demanding ambient conditions. European, SAE and ISO standard mounting flanges, drive shafts and ports let the unit be fitted to existing machinery without modifying the driveline, the mounting or the pipework.
3. Key parameters
Product Model: KP30.34D-83E3-LED/EB-N
Brand Replacement: CASAPPA OEM or as requested.
Displacement: 34.56 cm³/rev (2.11 in³/rev)
Rotation Direction: clockwise (D)
Peak Pressure: 290 bar (4,205 psi) with the standard CSC body design; 250 bar (3,625 psi) with the Compact (HSC) body design, 320 bar (4,640 psi) with the High performance (BSC) body design
Min./max. speed (350 / 3,000 r/min), the continuous and system pressure ratings, the drain-line limits and the port and flange torques are listed in full in Techspecs below.
- Description
- Tecspecs
- Brand & Reference
- Download CASAPPA Cast iron External Gear Pump KP30 PDF
- Send an Inquiry
| Overview of CASAPPA KP30.34D-83E3-LED/EB-N
CASAPPA KP30.34D-83E3-LED/EB-N is a KAPPA 30 external gear pump. Casappa builds the KAPPA range around a body and a mounting flange in cast iron of superior mechanical specification, and the KAPPA 30 is a solid, compact two-piece construction that allows several functions to be packed into a reduced space. Inside, the external gear pair runs on sleeve bearings between pressure-balanced thrust plates, so the assembly stays rigid and keeps its volumetric efficiency as pressure rises and as the unit wears. In the standard CSC body design the 34.56 cm³/rev gear set is rated 250 bar continuous, 270 bar system pressure and 290 bar peak, and turns between 350 and 3,000 r/min.
Its function in a circuit is to draw oil from the reservoir and convert drive-shaft rotation into pressurised flow. This unit carries the European E3 mounting flange, the European 1:8 tapered drive shaft (code 83) and European flanged four-bolt side ports — inlet ED (27 mm nominal), outlet EB (19 mm nominal). The same range can be ordered with European, SAE and ISO mounting flanges, nine drive-shaft options and threaded, split-flange or flanged ports, so one pump family covers a wide spread of existing installations.
| Dimension of CASAPPA KP30.34D-83E3-LED/EB-N
[Drawing placeholder — insert the dimensional drawing screenshot here]
Reference dimensions for the KP 30•34 single unit with side ports and the CSC body design. The letters correspond to the dimensional drawing.
| Ref. | mm | in |
|---|---|---|
| A — with European / split ports | 88.5 | 3.48 |
| B — with gas / SAE ports | 46 | 1.81 |
| C | 134 | 5.28 |
| D | 142 | 5.59 |
| E | 69.5 | 2.74 |
Interface data needed with the drawing:
| Item | Value |
|---|---|
| Mounting flange | European E3 standard |
| Drive shaft | European tapered 1:8, shaft code 83 — mounting face E3 (not available for size 30•41) |
| Ports position | L — inlet and outlet on the side |
| Ports IN / OUT | European flanged 4-bolt — inlet ED (27 mm nominal), outlet EB (19 mm nominal) |
| Version | 0 — without outboard bearing |
| Mounting flange bolt tightening torque | 70 ±7 Nm (558 ÷ 682 lbf in) |
| Body clamp bolt tightening torque | 140 ±14 Nm (1,115 ÷ 1,363 lbf in) |
| Pump Installation Specifications CASAPPA KP30.34D-83E3-LED/EB-N
The Casappa KAPPA 30 ordering code is a 12-position string: each position selects one characteristic of the unit, and reading it is the fastest way to check that a pump will fit an existing installation. Positions 1 to 8 define the unit itself; positions 9 to 12 define the drain port, the shaft-seal option, the body design and the painting.
Code structure — official example: KP 30•27 R 0 - 04 S3 - L OF/OD - N - OA - C4 - CSC - VNR01
| Pos. | Meaning | Options in the KAPPA 30 range |
|---|---|---|
| 1 | Type | KP 30•22 / •27 / •31 / •34 / •38 / •41 / •43 / •46 / •51 / •56 / •61 / •73 |
| 2 | Rotation | D clockwise / S anti-clockwise / R reversible, rear external drain / L reversible, side external drain / B reversible, internal drain |
| 3 | Outboard bearing | 0 without outboard bearing / 1 with outboard bearing / 3 with outboard bearing / 6 with outboard bearing |
| 4 | Drive shaft | 83 European tapered 1:8 / 04 SAE "B" spline 13 T / 32 SAE "B" straight / 05 SAE "BB" spline 15 T / 33 SAE "BB" straight / A8 SAE "B" spline for K9 flange / A5 SAE "BB" spline for K9 flange / 06 SAE "C" spline 14 T / A6 SAE "C" spline 14 T short type |
| 5 | Mounting flange | E3 European / S1, S2, S9 SAE "A" 2 holes / S3 SAE "B" 2–4 holes / K9 SAE "B" 2 holes / S6 SAE "C" 4 holes / S8 SAE "C" 2 holes / Q3 SAE "C" 2 holes short type |
| 6 | Ports position | L IN/OUT side / H IN side, OUT rear / K IN rear, OUT side / P IN/OUT rear |
| 7 | Ports IN/OUT | European flanged ED/EB for KP 30•22 to •61, EF/ED for KP 30•73 · SAE flanged (SSM) MC/MB for 22–38, MD/MC for 41–51, ME/MD for 56–73 · SAE flanged (SSS) SC/SB for 22–38, SD/SC for 41–51, SE/SD for 56–73 · SAE straight thread (ODT) OF/OD for 22–38, OG/OF for 41–73 · GAS straight thread (BSPP) GF/GE for 22–38, GG/GF for 41–73 |
| 8 | Seals | N Buna NBR (standard) / V Viton-FKM / T-PV HNBR seals with Viton-FKM shaft seals / N Bz Buna NBR with bronze thrust plates / V Bz Viton-FKM with bronze thrust plates |
| 9 | Drain port | no code GAS straight thread (BSPP, standard) / OA SAE straight thread (ODT) |
| 10 | Shaft seal options | no code standard seal / D shaft seal with wiper seal / C4 high-pressure special shaft seal |
| 11 | Body design | CSC Standard / HSC Compact (22–38) / BSC High performance (22–38–41–43–46) |
| 12 | Painting | no code without painting (standard) / VNR01 black / VGR01 grey |
Position 7 lists the port pair in IN/OUT order for pumps and in OUT/IN order for motors — which is why the same European flange appears as ED/EB on a pump and as EB/ED on a motor.
| Reading your code: KP30.34D-83E3-LED/EB-N
| Position | Code | Meaning |
|---|---|---|
| 1 | KP 30•34 | Type: KAPPA 30 group 3 pump, 34.56 cm³/rev (2.11 in³/rev) |
| 2 | D | Rotation: clockwise, looking at the drive shaft |
| 3 | not written | Outboard bearing: standard option — without outboard bearing |
| 4 | 83 | Drive shaft: European tapered 1:8 |
| 5 | E3 | Mounting flange: European standard |
| 6 | L | Ports position: inlet and outlet on the side |
| 7 | ED/EB | Ports IN/OUT: European flanged 4-bolt — inlet ED, outlet EB |
| 8 | N | Seals: Buna NBR, standard |
| 9 to 12 | not written | Drain port GAS straight thread (BSPP) standard; standard shaft seal; CSC standard body design; no painting |
The same unit is listed on the market as KP30.34D0-83E3-LED/EB-N (Casappa reference 03570000), i.e. with the position-3 digit 0 written out. Both strings describe the same pump.
| Techspecs of CASAPPA KP30.34D-83E3-LED/EB-N
| Performance
| Parameter | Value |
|---|---|
| Type | KP 30•34 — KAPPA 30 group 3 external gear pump |
| Displacement | 34.56 cm³/rev (2.11 in³/rev) |
| Continuous operating pressure p1 | 250 bar (3,625 psi) — CSC / CSL Standard body design |
| System pressure p2 (relief valve setting) | 270 bar (3,915 psi) — CSC / CSL Standard body design |
| Peak pressure p3 | 290 bar (4,205 psi) — CSC / CSL Standard body design |
| Compact body design, HSC / KSL | 210 / 230 / 250 bar (3,045 / 3,335 / 3,625 psi) |
| High performance body design, BSC / BSL | 280 / 300 / 320 bar (4,060 / 4,350 / 4,640 psi) |
| Reversible version | max. pressures 250 bar (3,600 psi), except the sizes whose rated value is lower |
| Max. speed | 3,000 r/min |
| Min. speed | 350 r/min |
| Theoretical flow | 103.7 l/min at 3,000 r/min · 51.8 l/min at 1,500 r/min (displacement × speed ÷ 1,000) |
| Max. drain line pressure, single-rotation pump | 0.5 bar (7 psi) |
| Max. drain line pressure, reversible pump | 5 bar (73 psi) |
| Multiple-pump versions | pressures must be limited by the transmissible torque of the drive and connecting shafts; special connecting shafts available up to 350 Nm (3,098 lbf in) |
| Efficiency | calculated from the catalogue design formulas Q = Qtheor. × ηv, M = Mtheor. ÷ ηhm, ηt = ηv × ηhm; performance curves are published for each displacement |
| Interfaces and configuration
| Parameter | Value |
|---|---|
| Rotation | D — clockwise |
| Mounting flange | European E3 standard |
| Drive shaft | European tapered 1:8 (shaft code 83), mounting face E3 |
| Ports position | L — inlet and outlet on the side |
| Ports IN / OUT | European flanged 4-bolt — ED (27 mm nominal) / EB (19 mm nominal) |
| Version | 0 — without outboard bearing |
| Seals | N — Buna NBR (standard) |
| Construction | Two-piece cast-iron construction: body and mounting flange in cast iron, external gear pair on sleeve bearings, pressure-balanced thrust plates |
| Mounting flange bolt tightening torque | 70 ±7 Nm (558 ÷ 682 lbf in) |
| Body clamp bolt tightening torque | 140 ±14 Nm (1,115 ÷ 1,363 lbf in) |
| Port bolt tightening torque | ED — M10 thread, 15 mm deep: 20 +1 Nm (177 ÷ 186 lbf in), 30 +2.5 Nm (266 ÷ 288 lbf in) on the high-pressure side · EB — M8 thread, 15 mm deep: 15 +1 Nm (133 ÷ 142 lbf in) |
| Operating conditions
| Parameter | Value |
|---|---|
| Fluid | Mineral-oil-based hydraulic fluid to ISO/DIN; fire-resistant fluids on request (specify the fluid type when ordering) |
| Inlet pressure range (pump) | 0.7 ÷ 3 bar abs. (10 ÷ 44 psi); above 1.5 bar abs. (22 psi) a specific shaft sealing must be used |
| Viscosity — recommended | 12 to 100 mm²/s (cSt) [60 to 456 SSU] |
| Viscosity — permitted | up to 750 mm²/s (cSt) [3,410 SSU] |
| Fluid temperature, N seals | −25 °C to 80 °C continuous (−13 °F to 176 °F); 100 °C (212 °F) max. peak |
| Fluid temperature, V / T-PV seals | −25 °C to 110 °C continuous (−13 °F to 230 °F); 125 °C (257 °F) max. peak |
| Cold start | min. inlet pressure 0.5 bar abs. (7 psi); outlet pressure ≤ 50 bar (725 psi); speed ≤ 1,500 r/min; max. oil viscosity 2,000 mm²/s (cSt) [9,100 SSU]; min. temperature −40 °C (−40 °F) |
| Recommended contamination | NAS 1638 class 10 / ISO 4406 21/19/16 at Δp < 140 bar; 10 μm filter element |
| Storage | dry environment; max. 24 months under ideal conditions; ideal storage temperature 5 °C to 20 °C (41 °F to 68 °F) |
Dimensions — see section 2.
CASAPPA KP30.34D-83E3-LED/EB-N Gear Pump
External gear pump · KAPPA 30 series · 250 bar continuous · 34.56 cm³/rev
Advantages
Cast-iron body and mounting flange
The KAPPA range is built around a body and a mounting flange in cast iron of superior mechanical specification, and the rigidity of that assembly is what holds reliability and high volumetric efficiency at high operating pressures.
High operating pressures
250 bar continuous, 270 bar system pressure and 290 bar peak in the standard CSC body design; the same displacement is available with the Compact and High performance body designs when the installation calls for a different pressure/flow trade-off.
Solid, compact two-piece construction
The KAPPA 30 packs several functions into a reduced space, which matters where the pump has to fit inside an existing housing or a tight driveline envelope.
Low noise emission
The external gear design keeps running noise low, which is a requirement on fan drives, municipal machinery and equipment working close to the operator.
Exceptional working life expectancy
Pressure-balanced thrust plates compensate for wear, so the pump keeps its flow as the unit ages.
High efficiency at high temperature
As the circuit oil heats up and the film thins, the cast-iron structure limits the loss of volumetric efficiency — the property Casappa specifies the KAPPA range for.
Available with built-in valves
KAPPA pumps can be ordered with integrated valve functions, which removes external plumbing from the circuit.
European standard interface
The E3 flange and the 1:8 tapered drive shaft match the mounting and the coupling European mobile machinery is already built for, and the ED/EB four-bolt flanged ports take standard European flange fittings.
Wide combination choice
European, SAE and ISO mounting flanges, nine drive shafts, four port positions and threaded, split-flange or flanged ports let the same pump be matched to an existing driveline, mounting and pipework.
Suited where fluids and size are critical
KAPPA is the range Casappa positions for applications where noise, contamination, non-flammable fluids and envelope size are the deciding factors.
Reference
The KP 30 range — same series, all displacements
Every size below is a valid position 1 in the KAPPA 30 pump ordering code. Pressures are the ratings for unidirectional pumps with side ports and the CSC / CSL Standard body design; reversible pumps are limited to a maximum of 250 bar, except the sizes whose rated value is lower.
| Pump type | Displacement | p1 | p2 | p3 | Max. speed | Min. speed |
|---|---|---|---|---|---|---|
| KP 30•22 | 21.99 cm³/rev (1.34 in³/rev) | 270 bar | 290 bar | 310 bar | 3,000 r/min | 350 r/min |
| KP 30•27 | 26.7 cm³/rev (1.63 in³/rev) | 270 bar | 290 bar | 310 bar | 3,000 r/min | 350 r/min |
| KP 30•31 | 30.63 cm³/rev (1.87 in³/rev) | 250 bar | 270 bar | 290 bar | 3,000 r/min | 350 r/min |
| KP 30•34 | 34.56 cm³/rev (2.11 in³/rev) | 250 bar | 270 bar | 290 bar | 3,000 r/min | 350 r/min |
| KP 30•38 | 39.27 cm³/rev (2.40 in³/rev) | 250 bar | 270 bar | 290 bar | 3,000 r/min | 350 r/min |
| KP 30•41 | 41.62 cm³/rev (2.54 in³/rev) | 250 bar | 270 bar | 290 bar | 3,000 r/min | 350 r/min |
| KP 30•43 | 43.98 cm³/rev (2.68 in³/rev) | 230 bar | 250 bar | 270 bar | 3,000 r/min | 350 r/min |
| KP 30•46 | 46.34 cm³/rev (2.83 in³/rev) | 210 bar | 230 bar | 250 bar | 3,000 r/min | 350 r/min |
| KP 30•51 | 51.83 cm³/rev (3.16 in³/rev) | 210 bar | 230 bar | 250 bar | 2,500 r/min | 350 r/min |
| KP 30•56 | 56.54 cm³/rev (3.45 in³/rev) | 190 bar | 210 bar | 230 bar | 2,500 r/min | 350 r/min |
| KP 30•61 | 61.26 cm³/rev (3.74 in³/rev) | 180 bar | 200 bar | 220 bar | 2,500 r/min | 350 r/min |
| KP 30•73 | 73.82 cm³/rev (4.50 in³/rev) | 170 bar | 190 bar | 210 bar | 2,500 r/min | 350 r/min |
The matching gear-motor range is KM 30, with the same displacements — the two sizes are alternative position-1 entries of the same 12-position code.
Complete order numbers identified on the market
Complete KAPPA 30 pump order numbers for the KP 30 range, from KP 30•22 to KP 30•73. Reference only — each number is valid only in the exact configuration it describes.
KP30.27D0-83E3-LED/EB-N
KP30.27S0-83E3-LED/EB-N
KP30.27D0-83E3-LED/EB-N-BZ
KP30.27D0-83E3-LED/EB-N-CSC
KP30.27S0-A5K9-LED/GD/GE-W-N-L
KP30.34D0-83E3-LED/EB-N
KP30.34S0-83E3-LED/EB-N
KP30.34B0-83E3-LED/EB-N
KP30.34D0-04S5-LED/EB-N
KP30.34-A8K9-LOF/OD-45-HSC
KP30.38D0-83E3-LED/EB-N
KP30.38S0-83E3-LED/EB-N
KP30.38-05S6-LMF-00-M5-KSL-30
KP30.43D0-83E3-LED/EB-N
KP30.43S0-83E3-LED/EB-N
KP30.51D0-83E3-LED/EB-N
KP30.51S0-83E3-LED/EB-N
KP30.51D0-06S8-LME/OF-N-CSC
KP30.51-A8K9-LSF/OF-M5-CSL/30.4
KP30.56D0-83E3-LED/EB-N
KP30.56S0-83E3-LED/EB-N
KP30.56D0-04S3-LOG/OC/OA-N-P9
KP30.56S0-84E4-LED/ED-N
KP30.56S0-A8K9-POG/OF-N-CSC
KP30.61D0-83E3-LED/EB-N
KP30.61S0-83E3-LED/EB-N
KP30.61D0-84E4-LEF/ED-N
KP30.61D0-A8K9-POG/OF-N-CSC
KP30.73D0-83E3-LED/EB-N
KP30.73S0-83E3-LED/EB-N
Official Casappa order examples for multiple-pump assemblies, for reference:
KP 30•27 R 0 - 04 S3 - L OF/OD - N - OA - C4 - CSC - VNR01
KP30•51 - A8K9 - L MD/MC - - CSL
KP30•51-A8K9-LMD/MC-NSL
Brand Replacement
HENGYUHANG supplies a replacement for the CASAPPA KAPPA 30 gear pump series, including KP30.34D-83E3-LED/EB-N and the rest of the KP 30 size range from KP 30•22 to KP 30•73. The replacement is built to the same group 3 dimensional envelope and the same international standard interfaces — European, SAE and ISO mounting flanges, the same drive-shaft families, and threaded, split-flange or flanged ports — so a machine originally fitted with a Casappa KAPPA 30 pump can be returned to service without modifying the driveline, the mounting or the pipework.
Replacement units are supplied to Casappa's published interface and dimension data for the KAPPA 30 group. The ordering code of the original pump is the reference used to confirm fitment, so please quote the complete original order number when enquiring.
Applications
Typical applications of the KAPPA 30 gear pump family:
Building and construction — supply pump on compact machines, excavators and loaders, roller and drum drives, auxiliary circuits
Material handling — lifting, tilting and positioning circuits on handling equipment, cranes and aerial platforms
Forestry — feed, conveyor, saw and attachment drives on forestry machinery
Fan drive — engine cooling fan drives and hydraulic fan circuits
Agriculture — supply and implement circuits on tractors, balers, harvesters, sprayers and seeders
Industrial hydraulics — presses, mixers, machine tools and plastic injection moulding machines
Special vehicles — municipal vehicles, cleaning vehicles and truck-mounted equipment
In these machines the pump feeds loads that run continuously at moderate circuit pressure, and is expected to hold flow under sustained load, high duty cycles and demanding ambient conditions. The cast-iron body, the sleeve-bearing gear pair and the pressure-balanced thrust plates are what let the unit keep its volumetric efficiency as circuit pressure and oil temperature rise.
Package & Shipping
| Item | Specification |
|---|---|
| Packaging | Single unit, wooden box / export-grade packing |
| Selling unit | Single item — MOQ 1 unit |
| Net weight | Approx. 13.6 kg for the KP 30•34 with the 83 E3 flange and side ports |
| Gross weight and package size | Confirmed per order, according to the shaft, flange and ports selected |
| Lead time | Confirmed per order, according to configuration and quantity |
| Shipping | Air, sea or express, quoted to destination |
| Customization | Customized packaging, nameplate and logo available for volume orders |
| Warranty | 1 year |
Why Choose Hengyuhang
A hydraulic specialist, not a general trader. Quanzhou Hengyuhang Power Technology Co., Ltd. is based in Fujian, China and manufactures hydraulic gear pumps and motors, synchronous motors, multiple pump units, pumps with built-in valves and custom valve blocks.
One-piece minimum order. MOQ is one unit, so a single machine can be put back into service without committing to a production batch.
Model-level verification before you order. Send the complete original order number — for this page, the full KP30.34D-83E3-… string — and the configuration is checked against Casappa's KAPPA 30 dimension, flange, shaft and port data before the unit is built.
In-house production and testing. CNC machining centres, automatic gear heat-treatment lines, single-piece-flow assembly and an automatic hydraulic test bench, with ERP/MES traceability through production.
Replacement coverage across the range. The same plant supplies replacement units for a wide list of hydraulic brands and models, which keeps a mixed machine fleet on one supplier.
Customization support. OEM, ODM and OBM are offered, and customized packaging, graphics, nameplate and logo are available for distributor orders.
One-year warranty. Every unit is covered by a one-year warranty.
Responsive after-sales. Online support for installation and application questions.
| Position | Code | Meaning |
| 1 | KP 30•34 | Type: KAPPA 30 group 3 pump, 34.56 cm³/rev (2.11 in³/rev) |
| 2 | D | Rotation: clockwise, looking at the drive shaft |
| 3 | not written | Outboard bearing: standard option — without outboard bearing |
| 4 | 83 | Drive shaft: European tapered 1:8 |
| 5 | E3 | Mounting flange: European standard |
| 6 | L | Ports position: inlet and outlet on the side |
| 7 | ED/EB | Ports IN/OUT: European flanged 4-bolt — inlet ED, outlet EB |
| 8 | N | Seals: Buna NBR, standard |
| 9 to 12 | not written | Drain port GAS straight thread (BSPP) standard; standard shaft seal; CSC standard body design; no painting |
| Pump type | Displacement | p1 | p2 | p3 | Max. speed | Min. speed |
| KP 30•22 | 21.99 cm³/rev (1.34 in³/rev) | 270 bar | 290 bar | 310 bar | 3,000 r/min | 350 r/min |
| KP 30•27 | 26.7 cm³/rev (1.63 in³/rev) | 270 bar | 290 bar | 310 bar | 3,000 r/min | 350 r/min |
| KP 30•31 | 30.63 cm³/rev (1.87 in³/rev) | 250 bar | 270 bar | 290 bar | 3,000 r/min | 350 r/min |
| KP 30•34 | 34.56 cm³/rev (2.11 in³/rev) | 250 bar | 270 bar | 290 bar | 3,000 r/min | 350 r/min |
| KP 30•38 | 39.27 cm³/rev (2.40 in³/rev) | 250 bar | 270 bar | 290 bar | 3,000 r/min | 350 r/min |
| KP 30•41 | 41.62 cm³/rev (2.54 in³/rev) | 250 bar | 270 bar | 290 bar | 3,000 r/min | 350 r/min |
| KP 30•43 | 43.98 cm³/rev (2.68 in³/rev) | 230 bar | 250 bar | 270 bar | 3,000 r/min | 350 r/min |
| KP 30•46 | 46.34 cm³/rev (2.83 in³/rev) | 210 bar | 230 bar | 250 bar | 3,000 r/min | 350 r/min |
| KP 30•51 | 51.83 cm³/rev (3.16 in³/rev) | 210 bar | 230 bar | 250 bar | 2,500 r/min | 350 r/min |
| KP 30•56 | 56.54 cm³/rev (3.45 in³/rev) | 190 bar | 210 bar | 230 bar | 2,500 r/min | 350 r/min |
| KP 30•61 | 61.26 cm³/rev (3.74 in³/rev) | 180 bar | 200 bar | 220 bar | 2,500 r/min | 350 r/min |
| KP 30•73 | 73.82 cm³/rev (4.50 in³/rev) | 170 bar | 190 bar | 210 bar | 2,500 r/min | 350 r/min |
KP30.27D0-83E3-LED/EB-N
KP30.27S0-83E3-LED/EB-N
KP30.27D0-83E3-LED/EB-N-BZ
KP30.27D0-83E3-LED/EB-N-CSC
KP30.27S0-A5K9-LED/GD/GE-W-N-L
KP30.34D0-83E3-LED/EB-N
KP30.34S0-83E3-LED/EB-N
KP30.34B0-83E3-LED/EB-N
KP30.34D0-04S5-LED/EB-N
KP30.34-A8K9-LOF/OD-45-HSC
KP30.38D0-83E3-LED/EB-N
KP30.38S0-83E3-LED/EB-N
KP30.38-05S6-LMF-00-M5-KSL-30
KP30.43D0-83E3-LED/EB-N
KP30.43S0-83E3-LED/EB-N
KP30.51D0-83E3-LED/EB-N
KP30.51S0-83E3-LED/EB-N
KP30.51D0-06S8-LME/OF-N-CSC
KP30.51-A8K9-LSF/OF-M5-CSL/30.4
KP30.56D0-83E3-LED/EB-N
KP30.56S0-83E3-LED/EB-N
KP30.56D0-04S3-LOG/OC/OA-N-P9
KP30.56S0-84E4-LED/ED-N
KP30.56S0-A8K9-POG/OF-N-CSC
KP30.61D0-83E3-LED/EB-N
KP30.61S0-83E3-LED/EB-N
KP30.61D0-84E4-LEF/ED-N
KP30.61D0-A8K9-POG/OF-N-CSC
KP30.73D0-83E3-LED/EB-N
KP30.73S0-83E3-LED/EB-N
KP30.27S0-83E3-LED/EB-N
KP30.27D0-83E3-LED/EB-N-BZ
KP30.27D0-83E3-LED/EB-N-CSC
KP30.27S0-A5K9-LED/GD/GE-W-N-L
KP30.34D0-83E3-LED/EB-N
KP30.34S0-83E3-LED/EB-N
KP30.34B0-83E3-LED/EB-N
KP30.34D0-04S5-LED/EB-N
KP30.34-A8K9-LOF/OD-45-HSC
KP30.38D0-83E3-LED/EB-N
KP30.38S0-83E3-LED/EB-N
KP30.38-05S6-LMF-00-M5-KSL-30
KP30.43D0-83E3-LED/EB-N
KP30.43S0-83E3-LED/EB-N
KP30.51D0-83E3-LED/EB-N
KP30.51S0-83E3-LED/EB-N
KP30.51D0-06S8-LME/OF-N-CSC
KP30.51-A8K9-LSF/OF-M5-CSL/30.4
KP30.56D0-83E3-LED/EB-N
KP30.56S0-83E3-LED/EB-N
KP30.56D0-04S3-LOG/OC/OA-N-P9
KP30.56S0-84E4-LED/ED-N
KP30.56S0-A8K9-POG/OF-N-CSC
KP30.61D0-83E3-LED/EB-N
KP30.61S0-83E3-LED/EB-N
KP30.61D0-84E4-LEF/ED-N
KP30.61D0-A8K9-POG/OF-N-CSC
KP30.73D0-83E3-LED/EB-N
KP30.73S0-83E3-LED/EB-N
| Official Casappa order examples for multiple-pump assemblies, for reference:
KP 30•27 R 0 - 04 S3 - L OF/OD - N - OA - C4 - CSC - VNR01
KP30•51 - A8K9 - L MD/MC - - CSL
KP30•51-A8K9-LMD/MC-NSL
KP30•51 - A8K9 - L MD/MC - - CSL
KP30•51-A8K9-LMD/MC-NSL
WhatsApp
Email
+86 19918575358
